Pay attention to these points when using the wire binding machine

The common functions of the automatic winding machine include: number of turns preset, automatic parking, forward and reverse rotation, automatic grooving, etc. In specific applications, attention should be paid to the following aspects: The idle is started first, then the idle is terminated. The function of the idle vehicle is to run slowly after the equipment starts. The purpose is to reduce the damage to the supporting structure and the silk-covered wire. Generally, it can be set to 1 to 3 laps according to specific needs. Idle action refers to the slow operation of the equipment before the end of the winding sequence. This function can reduce the impact on the braking system and make the machine complete the unwinding smoothly, especially the unwinding process that requires precise positioning. This parameter must be set according to the device. The operating speed is different, and the parameters should be adjusted accordingly. Usually 2 to 5 laps. The third is the winding orientation and winding orientation. The two main parameters are the setting of winding offset orientation and spindle bearing rotation orientation. The winding shaft and spindle bearing of the automatic winding machine are controlled by the control panel and have a special interlocking relationship. Be sure to understand the offset direction of the secret medicine when setting. Many users will report equipment alarms during adjustment, which is caused by incorrect equipment. The winding machine has a test zero point for precise positioning of the winding shaft. If the machine starts from zero, the winding shaft must move outward. If it is set to move inside incorrectly, it will cause an alarm on the device. The rotation direction should be determined according to the winding process, and all settings should take into account the requirements of the winding process.

Brushed motor technology is used in every field, and brushed motor model aircraft winding machine equipment also uses brushed motor technology. When using a brushed motor model aircraft winding machine, the operator should always keep in mind and strictly implement some matters and rules.

1. After the winding machine with brushed motor aircraft model aircraft is turned on, it must be operated on the air switch for a period of time to check the wiring of the DC brushless motor winding machine equipment, the number of winding coil turns and its reset method and parking position. Compliance. If such problems are found during this period, they need to be readjusted. Once adjustments have been made to meet the requirements, operations can be declared.

2. During the operation process, it is necessary to pay attention to whether the screws of the brushed motor model aircraft winding machine are loose. After discovering a problem, please stop the operation immediately and notify the professional staff for inspection. During high-speed operation, do not touch the moving parts, and must strictly follow the operating conditions of the winding machine. During the process of suspension cable and loading and unloading frame positioning device, the winding machine cannot be started.

3. Before getting off work, the operating staff should clean and maintain each part according to the requirements of the brushed motor aircraft model aircraft winding machine, and keep the working environment of the winding machine clean. Arrange all the parts neatly, and don't forget to turn off the power supply of the winding machine.